Special Purpose Adapters

Special Purpose Adapters
Sort By:
Show:
Display: List Grid
  • Speedflow 460 Series Weld On Filler Cap & Bung
    Speedflow manufactures these beautifully presented weld on caps & bungs. Three sizes are available. The cap is machined with a female thread, an o-ring seal and finger grips for ease of tightening and loosening. The cap comes in a raw state so you can anodise in any colour you require. ..
  • Speedflow 462 Series Weld On Radiator Necks
    These radiator necks are just what you need when making your aftermarket radiator.  Available in two styles (Lg) most Non Japanese caps and (Small) most Japanese caps.  2 styles available Large diameter base eliminates distortion when welding Comes with rem..
  • Speedflow 660 Series Mechanical Gauge Adapter - Autometer
    5/8 Female Gauge Adaptors You have just brought a new mechanical gauge for your pride and joy, but guess what the fittings supplied don't fit the engine.  Well... we have been there too.  The fitting listed below should be enough to get you out of trouble. All fittings ..
  • Speedflow 900 Series Aluminium Crush Washers
    We have in stock an extensive range of aluminium crush washers. These are used to seal fittings such as banjo's, male nipples and plugs that screw into a hole that does not have a flared seat. It is recommended that washers should only be used once and that the sealing surface should be a ma..
  • Speedflow 903 Series - Bulkhead Nylon Washers
    We stock a full range of bulkhead fittings. These are used to pass hoses through bulkheads, firewalls, fuel cells, floor panels and any other bracket or solid material. It gives a secure seal and a professional look with using a bulkead nut and washers and the correct hose ends. Made from high qu..
  • Speedflow 905 Series - O-Rings (Dash Size)
    These dash O-Rings fit all the 920 / 922 speedflow range of fittings that are designed for O-Ring port adaptors. Suit 920 & 922 Adaptors   Part Number Dash Size Inside Diameter ..
  • Speedflow 989 Series Weld On EGT Nipple 1/4" K Type
    We now have available these very hard to find EGT weld on fittings. Speedflow manufactures these new weld on's to suit the poular K Type EGT probes. This solves the problem when you change exhaust and need to put your EGT probes in, but you don't have the weld on's to suit. Only..
  • Speedflow Aluminium Bar End Off Cuts
    These off cuts from Speedflow are so handy around the workshop.  Available in Hex and Round bar in different size diameters they are supplied in assorted mixed 1kg bags. Great when making spacers, washers etc Different grade material including 6061 ..