XRP Hoses & Fittings

XRP Hoses & Fittings
Sort By:
Show:
Display: List Grid
  • XRP - Stat-O-Seals (Alloy Washer with Moulded O-Ring)
    The Stat-O-Seal is simply the best sealing washer available. It consists of a Buna synthetic rubber "O" ring mechanically locked to the I.D. of an aluminum washer. When tightened the "O" ring is compressed, forcing the sealing surfaces around the bolt shank. They will form a positive seal ov..
  • XRP / Long Male AN Flare Bulkhead - Straight
    We stock a full range of bulkhead fittings. These are used to pass hoses through bulkheads, firewalls, fuel cells, floor panels and any other bracket or solid material. It gives a secure seal and a professional look with using a bulkead nut and washers and the correct hose ends. Made from high qu..
  • XRP / Speedflow 850 Series Male AN Plastic Plugs
    Plastic plugs are used to block off female hose ends and holes. They are to be used only to block off as a dust cap when removing hoses. • Plastic Caps & Plugs come standard in Red.   Part Number Size ..
  • XRP 100 Series Braided Hose End to NPT Male - 90 Degree
    Designed to be used with 100 Series Stainless Steel Braided Hose. These hose ends are designed to screw directly into any NPT female thread and adapt at 90° to braided hose. This is a great fitting for tight spots where an adapter and hose end is just too long or you need to sc..
  • XRP 100 Series Rubber Braided Hose End to NPT Male Straight AN Adaptor
    Designed to be used with 100 Series Stainless Steel Braided Hose. These hose ends are designed to screw directly into any NPT female thread and adapt to braided hose. This is a great fitting for tight spots where an adapter and hose end is just too long. • XRP - USA Ma..
  • XRP 700 Series Male to Male Gauge Adapters 1/8" Port
    These fittings are a great way to put a pressure gauge inline in a hose. Several combinations of hose sizes are available, all with a 1/8"NPT female port. Screw in line with 2 hose ends, or straight into a regulator or block with an NPT thread.   Part Number..
  • XRP 824 Series Stepped Male AN Flare Tee
    XRP manufactures these stepped tees to use different sized hose ends from the tee. This eliminates the use of a reducer or expander as commonly done in the past. The tees are available in -6 and -8 sizes only in every combination.  • XRP - USA Made. • Lightweight aluminium and fu..
  • XRP Cushion Clamps
    Our Cushion Clamps or "P-Clamps" as they are know are great for securing hoses and wiring.    • Light Weight • Large hole for securing to panel • Made from Aluminun • Very strong   Part Number Size ..
  • XRP Double End Pro Series Aluminium Spanner Set
    These spanner sets are a great addition to any tool box! The double end style gives you two different sizes per spanner. These are designed to be used on the swivel nut when tightening and loosening the hose ends on the vehicle. These alloy spanners are not designed to be used for a..
  • XRP Dry Sump AN Scavenge Filter
      Known as Rock Stoppers XRP inline filters help to protect any debry from a engine blow up trashing your expensive dry sump pump.  Available in AN male fittings, -12 ORB to -12AN and the filter is available by itself to suit -12 ORB nipple . They ..
  • XRP Female Swivel to Male NPT Adapters
    Ever wanted to put a fuel filter on to a fuel pump with the least amount of fittings? Now you can with these female swivel to NPT male fittings. You can screw the male into any NPT hole of the same size and join to a male end with the swivel. As anexample you have a -8 male fuel filter ..
  • XRP Fire Jacket (Elastic Heat Sleeve)
    Motorsport Connections offers several products to protect your engine hoses, wiring and cables in high temperature aplications. Fire Jacket is constructed from a smooth silver silicone outer jacket with a woolen glass liner and is designed to withstand continuous temperatures u..